Class 10 Automotive Question Papers For Practice
আপুনি যদি ইংৰাজী মাধ্যম Class 10 ৰ ছাত্র বা ছাত্রী হয় তেনেহলে নিচ্ছই আপুনি ইন্টাৰনেটত Class 10 Automotive Question Papers For Practice বিচাৰি আছে? হয়। চিন্তা নকৰিব, আমাৰ এই প্রবন্ধত Automotive subject ৰ Question Papers For Practice ইংৰাজী আৰু অসমীয়া মাধ্যমৰ সম্পূৰ্ণ সমাধান বিনামূলীয়া কৈ যোগান ধৰা হৈছে।
Question Papers For Practice
(অনুশীলনৰ বাবে প্ৰশ্ন কাকত)
👉Class 10 English Automotive All Session Question Answer
Sample Question Papers
Sample-1
Subject: Automotive
Class-IX
Section A
Multiple Choice Questions. Attempt any ten questions.
(1×1010 marks)
1. Which of the following is not a component of a Petrol Engine?
(a) Fuel Injection Pump (FIP)
(b) Ignition coil
(c) Distributor
(d) Fuel filter
2. In a fully charged lead-acid battery the active material for positive plates is
(a) Pure lead (Pb)
(b) Spongy lead
(c) Lead peroxide (PbO2)
(d) Sulphuric acid (H2SO4)
3. To form an impression of the tip on a workpiece, which of the following tools is used?
(a) Punch
(b) Hammer
(c) Snips
(d) Wrenches
4. Tachometer is used to measure the (a) Resistance of a circuit
(b) Speed of vehicle
(c) Speed of engine
(d) Power of engine
5. Which of the following measuring tools does not have the in-built measuring scale?
(a) Steel ruler
(b) Caliper
(c) Screw gauge
(d) Vernier caliper
6. Wheel balancing helps in minimizing
(a) Weight
(b) Traction
(c) Tyre vibration
(d) Air pressure
7. Air filter of a vehicle is cleaned by
(a) Chemical
(b) Water
(c) Kerosene
(d) Air blower
8. In the process of manual wash of a car, __________ used for cleaning of windscreen and window glasses. is
(a) Detergent
(b) Dish soap
(c) Terry cloth
(d) Newspaper
9. For better performance of cooling system in a car and to keep the radiator system free of corrosion, change the coolant after every.
(a) 6 months
(b) 1 year
(c) 2 years
(d) 3 years
10. Microprocessors in automobiles must withstand temperature swings from __________ to __________ °C.
(a) 0° to 100°
(b) 0° to 120°
(c)-40° to 130°
(d)-20° to 100°
11. As per service manual, it is mandatory to check the level of engine oil and coolant
(a) Daily
(b) Weekly
(c) Fortnightly
(d) Monthly
12. The useful information given in the owner’s manual should always be followed as per schedule in order to improve the __________ of the vehicle.
(a) Look
(b) Fuel mileage
(c) Tyre life
(d) Safety system
Section B
Very Short Answer Type Questions. Answer any five questions.
(2×510 marks)
13. Define engine capacity.
14. Write the function of thermostat in liquid cooling system.
15. What is un-sprung weight?
16. Write the function of ignition coil in the S.I. engine.
17. How can one prepare a car for changing engine oil?
18. Write the properties of an ideal coolant.
19. Why is replacement of fuel filter necessary at the manufacturer’s recommended interval?
Section C
Short Answer Type Questions. Answer any five questions.
(3 x 5 = 15 marks)
20. What are the requirements of a good braking system in a vehicle?
21. With sketch, explain the hypoid gears of final drive.
22. Explain torque wrench in brief.
23. What are the materials and tools required for changing of fuel filter in a car?
24. Define ‘Customer Service’ and ‘Customer Support’.
25. Explain ‘Anti-lock Braking System (ABS)’ in automobiles.
26. What is the information provided in a service manual to the vehicle owner?
Section D
Long Answer Type Questions. Answer any three questions.
(5×315 marks)
27. Write the classification and uses of the following hand tools:
(a) Hammer
(b) Chisel
28. Write the step-by-step procedure for manually cleaning/washing a vehicle.
29. Explain important aspects of customer service.
30. Explain the following new innovations in car safety technology:
(a) Tyre air pressure monitoring system
(b) Blind-spot detection technology
31. Explain the suspension system in a vehicle.
Sample -2
Sub: Automotive
Class X
Section A
Multiple Choice Questions. Attempt any ten questions.
(1×1010 marks)
1. Which of the following is not a part of the cooling system in an automobile?
(a) Radiator
(b) Fan
(c) Clutch plate
(d) Thermostat
2. Which tool is used for tightening or loosening nuts and bolts?
(a) Screwdriver
(b) Spanner
(c) Pliers
(d) Punch
3. Which type of engine uses spark plugs?
(a) Diesel Engine
(b) Petrol Engine
(c) Gas Turbine Engine
(d) Steam Engine
4. The battery of a vehicle is rated in:
(a) Watts
(b) Amperes
(c) Volts and Ampere-hours (Ah)
(d) Ohms
5. Which of the following is not a part of a lubrication system?
(a) Oil pump
(b) Oil filter
(c) Fuel injector
(d) Oil pan
6. Which of the following is used to measure tyre pressure?
(a) Vernier caliper
(b) Pressure gauge
(c) Tachometer
(d) Ammeter
7. The clutch in a vehicle is located between:
(a) Engine and Gearbox
(b) Gearbox and Differential
(c) Radiator and Engine
(d) Battery and Starter
8. A shock absorber is a part of:
(a) Cooling system
(b) Ignition system
(c) Suspension system
(d) Lubrication system
9. Which type of brakes are commonly used in the rear wheels of small cars?
(a) Disc brakes
(b) Drum brakes
(c) Hydraulic brakes
(d) Air brakes
10. Which component is responsible for supplying fuel to the carburetor or injectors?
(a) Fuel pump
(b) Radiator
(c) Differential
(d) Silencer
11. The horn of a vehicle works on the principle of:
(a) Magnetism
(b) Electricity and vibration
(c) Hydraulic pressure
(d) Air compression
12. What does OBD stand for in automobiles?
(a) On Board Data
(b) On Board Diagnosis
(c) Over Brake Device
(d) Oil and Brake Detector
Section B
Very Short Answer Type Questions. Answer any five questions.
(2×510 marks)
13. Define wheel alignment.
14. Write the function of a carburetor.
15. What is the function of a silencer in a vehicle?
16. Why should tyre pressure be checked regularly?
17. What is the role of a fan belt?
18. Name any two functions of gearbox in a vehicle.
19. Define preventive maintenance.
Section C
Short Answer Type Questions. Answer any five questions.
(3×515 marks)
20. Write any three advantages of tubeless tyres.
21. Explain the importance of lubrication in an engine.
22. What are the steps for replacing a blown fuse in a vehicle?
23. Differentiate between disc brake and drum brake.
24. Write the function of differential in a vehicle.
25. Explain the term “Fuel Efficiency” and how it can be im-proved.
26. Mention three personal safety measures while working in a workshop.
Section D
Long Answer Type Questions. Answer any three questions.
(5×315 marks)
27. Write the step-by-step procedure for checking and top-ping up engine oil in a car.
28. Describe the construction and working of a radiator.
29. Explain the functions, types, and importance of transmis-sion system.
30. Write in detail about the daily maintenance checks to be performed on a vehicle.
31. Explain the working of hydraulic braking system with a neat sketch.
